Igwe na-afụ ihe nkiri na-eji cylinder na ihe nkedo na-eme ka ọkpụkpụ alloy dị mma nke a na-edozi ma na-edozi ya n'ụzọ ziri ezi. The pụrụ iche-e ịghasa bụ nke ụda àgwà na plasticizing, nke na-enyere aka dịkwuo mmepụta ike. A na-etinye ya na ịfụ ihe nkiri plastik dị ka obere density polytene (LDPE), polytene dị elu (HDPE) na linear low density polytene (LLDPE). A na-etinye ya n'ọtụtụ ebe n'ịmepụta akpa nkwakọ ngwaahịa maka ihe oriri, akwa, akpa ahịhịa na akwa akwa.
Mfe mmepụta
Ogologo ihe nkiri nke igwe ihe nkiri dị site na 150mm ruo 1200mm (5 ruo 48 inch) enwere ike ịhazi ya dabere na ihe ndị ahịa chọrọ, dabara maka HDPE, ihe nkiri LDPE na ihe nkiri eji emegharị ihe.
Akụrụngwa Nhọrọ:
1) Ihe nkpuchi akpaaka
2) Air Compressor
3) Rotary Die Head
4) Winda akụkụ abụọ (Back na azụ winder)
5) elu na ala
6) Embossing Silinder
7) Igwe ikuku
8)Masterbatch Dosing ngwaọrụ
9) Akpaka Winder Changer
10) ọgwụgwọ Corona
| Nlereanya |
A50 |
A55 |
A65 |
A65-1 |
| Ihe onwunwe |
HDPE, LDPE, LLDPE nwa agbọghọ na-amaghị nwoke akụrụngwa, recycled ihe, CaCO3 compound, biodegradable material, masterbatch and additives material |
| Agba ihe nkiri |
Transparent, Black, Red, White, Blue… Agba nke mastbatch gbanwere |
| Ojiji |
Akpa nkwakọ ngwaahịa na-agbanwe agbanwe, akpa T-uwe, akpa ịzụ ahịa plastik, akpa ahịhịa, ihe nkiri mbukota, ihe mkpuchi tebụl, ihe nkiri na-ebelata |
| Dayameta nke ịghasa |
f50 |
f55 |
f65 |
f65 |
| Dayameta ihe nkiri a kpụrụ akpụ |
100-600 mm |
200-800 mm |
300-1000 mm |
400-1200 mm |
| Otu akụkụ ihe nkiri Ọkpụrụkpụ |
0.01-0.10 mm |
| Oke kacha (Kg/h) |
35 |
50 |
65 |
80 |
| Oke nke Screw L/D |
28:1 |
28:1 |
28:1 |
28:1 |
| Ihe kpochie |
38CrMoAl |
38CrMoAl |
38CrMoAl |
38CrMoAl |
| Ike nke nnukwu moto (kw) |
7.5-11 |
11-15 |
18.5-22 |
22 |
| Ike nke Tracion |
1,1kw |
1,1kw |
1,5kw |
1,5kw |
| Ike ikpo oku (kw) |
11 |
13 |
19 |
21 |
| Ụbọchị nnyefe |
30-45 ụbọchị |
30-45 ụbọchị |
30-45 ụbọchị |
30-45 ụbọchị |
| Nha igwe (m) |
4.8 x 1.9 x 3.8 |
5.5x2.1x4.6 |
6.5x2.3x5.2 |
6.5x2.5x5.2 |
| Ibu(T) |
1.5T |
2t |
2.3T |
2.6T |
| Voltaji ike |
220V,380V,440V,480V(ahaziri dabere na arịrịọ,Dịka ọmụmaatụ: USA 480V 60Hz, Mexico 440V/220V 60Hz, Saudi Arabia 380V 60Hz, Nigeria 415V 50Hz...) |
| Dayameta isi ihe |
76mm (3 inch) |
| Igwe na-arụ ọrụ oge |
24 awa * 7 ụbọchị |
| Akwụkwọ ikike |
1 afọ |
| Ngwa nhọrọ |
Onye na-ebu akpaaka, sistemụ nchịkwa masterbatch, isi ọnwụ rotary, onye na-ahụ maka afụ, onye na-agwọ corona, rola embossing, winder akpaka, winder okpukpu abụọ. |
| Enyemaka nka nka |
Ndị injinia dị maka igwe ọrụ na mba ofesi |
※Nkọwapụta ziri ezi na-adabere na ụdị n'ezie. Nkọwapụta niile nwere ike ịgbanwe na-enweghị ọkwa mbụ.
Wụnye igwe na Saudi Arabia.
Ọ bụrụ na ịzụrụ otu igwe akpa, anyị ga-ebu igwe nwere ihe nkiri gbatịa na akpa akpa ozugbo(Ibu akpa akpa FCL zuru oke).
Ọ bụrụ na ị na-azụta otu igwe, anyị ga-ebu igwe na osisi mkpọ, na loading akpa na Ihe na-erughị ibu akpa (LCL).
Anyị isi akụkụ cooperator dị ka ndị na-esonụ ika, ma ọkọlọtọ akụkụ niile mere si China.
Otu esi achọta polyethylene maka extrusion ihe nkiri afụfụ.
Extrusion Film Extrusion na-eji polyethylene, dị ka
Polyethylene dị obere (LDPE), Polyethylene dị elu (HDPE) na Linear Low Density Polyethylene (LLDPE), Polypropylene (PP).
N'okpuru ebe a bụ nnukwu ụdị ngwaahịa soplaya na ụwa, ha na-emeghe ụlọ ọrụ n'ụwa nile, ị nwere ike ịlele ha na mpaghara ahịa.
1.Ụgwọ nke ụlọ ọrụ Sabic Saudi Basic Industries Corporation
2.Ụlọ ọrụ ExxonMobil Chemical Company
3.Ụlọ ọrụ Dow Chemical
